General Specification: Transaxle
WARNING: This page is about a different variant/trim than selected.
GENERAL SPECIFICATIONS
| Engine type | QR25DE | ||
| Transaxle model | RS6F52A | ||
| Model code number | ET80D | ||
| Number of speed | 6 | ||
| Synchromesh type | Warner | ||
| Shift pattern | |||
| Gear ratio | 1st | 3.153 | |
| 2nd | 1.950 | ||
| 3rd | 1.392 | ||
| 4th | 1.055 | ||
| 5th | 0.809 | ||
| 6th | 0.630 | ||
| Reverse | 3.002 | ||
| Number of teeth | Input gear | 1st | 13 |
| 2nd | 20 | ||
| 3rd | 28 | ||
| 4th | 36 | ||
| 5th | 42 | ||
| 6th | 46 | ||
| Reverse | 3 | ||
| Main gear | 1st | 41 | |
| 2nd | 39 | ||
| 3rd | 39 | ||
| 4th | 38 | ||
| 5th | 34 | ||
| 6th | 29 | ||
| Reverse | 8 | ||
| Reverse idler gear | Front | 37 | |
| Rear | 38 | ||
| Oil level | mm (in) | 61.0 - 67.0 (2.402 - 2.638) | |
| Oil capacity (Reference) | l (US pt, Imp pt) | 1.7 (3-5/8, 3) | |
| Remarks | Reverse synchronizer | Installed | |
| Double-cone synchronizer | 3rd | ||
| Triple-cone synchronizer | 1st and 2nd | ||