LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Manual Transmission - RS6F52A) >> Service Information >> Preparation >> Commercial Service Tool

Commercial Service Tool

WARNING: This page is about a different variant/trim than selected.
COMMERCIAL SERVICE TOOL REFERENCE CHART

Tool name Description
Pin punch
G07138615Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing and installing retaining pin
  1. 4.5 mm (0.177 in) dia. 
Pin punch
G07138616Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing and installing retaining pin of selector lever
  1. 5.5 mm (0.217 in) dia. 
Pin punch
G07138617Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing and installing retaining pin of each shifter lever
  1. 7.5 mm (0.295 in) dia. 
Drift
G07138618Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing striking rod oil seal and shifter lever oil seal
  1. 24.5 mm (0.965 in) dia. 
Puller
G07138619Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing each bearing, gear, and bushing
Puller
G07138620Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing each bearing, gear, and bushing
Power tool
G07138621Courtesy of NISSAN MOTOR CO., U.S.A.
 Loosening bolts and nuts
scientia non olet · About LEMON Manuals