LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Cooling System (Qr25DE)) >> Service Information >> Thermostat And Thermostat Housing >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: Perform when the engine is cold.
  1. Drain engine coolant from the radiator. Refer to "CHANGING ENGINE COOLANT ".
  2. Remove front air duct. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove radiator hose (lower) from the engine coolant inlet side.
  4. Remove engine coolant inlet, O-ring and thermostat.
scientia non olet · About LEMON Manuals