LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Cooling System (Qr25DE)) >> Service Information >> Cooling Fan >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Partially drain engine coolant from radiator. Refer to "CHANGING ENGINE COOLANT ".
    CAUTION:
    • Perform this step when engine is cold.
    • Do not spill engine coolant on drive belt.
  2. Remove front air duct. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect radiator hose (upper) at radiator side. Refer to "COMPONENT ".
  4. Disconnect harness connectors from fan motor, and position harness aside.
  5. Remove cooling fan assembly.
    CAUTION: Be careful not to damage or scratch the radiator core.
scientia non olet · About LEMON Manuals