General Specifications
WARNING: This page is about a different variant/trim than selected.
GENERAL SPECIFICATIONS
| Model | SE-R | SE-R Spec V | |
| Cylinder arrangement | In-line 4 | ||
| Displacement cm3 (in3 ) | 2,488 (151.82) | ||
| Bore and stroke mm (in) | 89.0 x 100 (3.50 x 3.94) | ||
| Valve arrangement | DOHC | ||
| Firing order | 1-3-4-2 | ||
| Number of piston rings | Compression | 2 | |
| Oil | 1 | ||
| Compression ratio | 9.5:1 | 10.5:1 | |
| Compression pressure kPa (kg/cm2 , psi)/250 rpm | Standard | 1,250 (12.8, 181.3) | |
| Minimum | 1,060 (10.8, 153.7) | ||
| Differential limit between cylinders | 100 (1.0, 14) | ||
| Valve timing | |||
VALVE TIMING SPECIFICATIONS
| Unit: degree | |||||
|---|---|---|---|---|---|
| a | b | c | d | e | f |
| 224° | 244° | 0° | 64° | 3° | 41° |