LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical (Qr25DE)) >> Service Information >> Service Data And Specifications (SDS) >> Standard and Limit >> Crankshaft

Standard and Limit: Crankshaft

WARNING: This page is about a different variant/trim than selected.
CRANKSHAFT SPECIFICATIONS

Unit: mm (in)
G07137637Courtesy of NISSAN MOTOR CO., U.S.A.
G07137638Courtesy of NISSAN MOTOR CO., U.S.A.
  Grade(1) Dimension
Pin journal dia. "DP" Grade No. A 44.974 - 44.973 (1.7706 - 1.7706)
Grade No. B 44.973 - 44.972 (1.7706 - 1.7705)
Grade No. C 44.972 - 44.971 (1.7705 - 1.7705)
Grade No. D 44.971 - 44.970 (1.7705 - 1.7705)
Grade No. E 44.970 - 44.969 (1.7705 - 1.7704)
Grade No. F 44.969 - 44.968 (1.7704 - 1.7704)
Grade No. G 44.968 - 44.967 (1.7704 - 1.7704)
Grade No. H 44.967 - 44.966 (1.7704 - 1.7703)
Grade No. J 44.966 - 44.965 (1.7703 - 1.7703)
Grade No. K 44.965 - 44.964 (1.7703 - 1.7702)
Grade No. L 44.964 - 44.963 (1.7702 - 1.7702)
Grade No. M 44.963 - 44.962 (1.7702 - 1.7702)
Grade No. N 44.962 - 44.961 (1.7702 - 1.7701)
Grade No. P 44.961 - 44.960 (1.7701 - 1.7701)
Grade No. R 44.960 - 44.959 (1.7701 - 1.7700)
Grade No. S 44.959 - 44.958 (1.7700 - 1.7700)
Grade No. T 44.958 - 44.957 (1.7700 - 1.7700)
Grade No. U 44.957 - 44.956 (1.7700 - 1.7699)
Main journal dia. "Dm" grade Grade No. A 54.979 - 54.978 (2.1645 - 2.1645)
Grade No. B 54.978 - 54.977 (2.1645 - 2.1644)
Grade No. C 54.977 - 54.976 (2.1644 - 2.1644)
Grade No. D 54.976 - 54.975 (2.1644 - 2.1644)
Grade No. E 54.975 - 54.974 (2.1644 - 2.1643)
Grade No. F 54.974 - 54.973 (2.1643 - 2.1643)
Grade No. G 54.973 - 54.972 (2.1643 - 2.1642)
Grade No. H 54.972 - 54.971 (2.1642 - 2.1642)
Grade No. J 54.971 - 54.970 (2.1642 - 2.1642)
Grade No. K 54.970 - 54.969 (2.1642 - 2.1641)
Grade No. L 54.969 - 54.968 (2.1641 - 2.1641)
Grade No. M 54.968 - 54.967 (2.1641 - 2.1641)
Grade No. N 54.967 - 54.966 (2.1641 - 2.1640)
Grade No. P 54.966 - 54.965 (2.1640 - 2.1640)
Grade No. R 54.965 - 54.964 (2.1640 - 2.1639)
Grade No. S 54.964 - 54.963 (2.1639 - 2.1639)
Grade No. T 54.963 - 54.962 (2.1639 - 2.1639)
Grade No. U 54.962 - 54.961 (2.1639 - 2.1638)
Grade No. V 54.961 - 54.960 (2.1638 - 2.1638)
Grade No. W 54.960 - 54.959 (2.1638 - 2.1637)
Grade No. X 54.959 - 54.958 (2.1637 - 2.1637)
Grade No. Y 54.958 - 54.957 (2.1637 - 2.1637)
Grade No. 4 54.957 - 54.956 (2.1637 - 2.1636)
Grade No. 7 54.956 - 54.955 (2.1636 - 2.1636)
Center distance "r" 49.60 - 50.04 (1.9528 - 1.9701)
Out-of-round (X - Y) Standard Less than 0.005 (0.0002)
Taper (A - B) Standard Less than 0.005 (0.0002)
Runout [TIR(2)] Limit Less than 0.05 (0.002)
Free end play Standard 0.10 - 0.26 (0.0039 - 0.0102)
Limit 0.30 (0.0118)
(1) Always check with the Parts Department for the latest parts information
(2) Total indicator reading