Removal and Installation of Rear Oil Seal: Installation

WARNING: This page is about a different variant/trim than selected.

Apply new engine oil to new oil seal and install it using a suitable drift.
- Install new oil seal in the direction shown in the figure.
  
  Fig 1: View Of New Oil Seal
  Courtesy of NISSAN MOTOR CO., U.S.A.
- Press fit new oil seal straight using a suitable drift, to avoid causing burrs or tilting.
  
  Fig 2: Pressing Fit New Oil Seal Straight Using Suitable Drift
  Courtesy of NISSAN MOTOR CO., U.S.A.
- Press in the new oil seal to the specified depth as shown in the figure.
  
  Fig 3: Checking For Proper Installation Depth Of New Oil Seal
  Courtesy of NISSAN MOTOR CO., U.S.A.
Installation of the remaining components in reverse order of removal.