LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical (Qr25DE)) >> Service Information >> Ignition Coil >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine room cover.
  2. Remove resonator. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect the harness connector from the ignition coil.
  4. Remove the ignition coil.
    CAUTION: Do not drop or shock it.
scientia non olet · About LEMON Manuals