LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical (Qr25DE)) >> Service Information >> Cylinder Head >> Inspection After Disassembly >> Valve Spring Dimensions And Valve Spring Pressure Load

Valve Spring Dimensions And Valve Spring Pressure Load

WARNING: This page is about a different variant/trim than selected.

Check valve spring pressure with valve spring seat installed at specified spring height. Replace if not within specifications. Refer to "STANDARD AND LIMIT ".

CAUTION: Do not remove the valve spring seat.
Fig 1: Checking Valve Spring Dimensions And Valve Spring Pressure Load
G07137555Courtesy of NISSAN MOTOR CO., U.S.A.