Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Installation is in the reverse order of removal.

Install differential side oil seal (1) to clutch housing and transaxle case using Tool.
CAUTION: Do not reuse oil seal.

Tool number : KV32500QAA (B.vi 1666-B)
- A: Transaxle case side
- B: Clutch housing side
  Dimension (L1) : 1.2 - 1.8 mm (0.047 - 0.071 in)
  
  Dimension (L2) : 2.7 - 3.3 mm (0.106 - 0.130 in)
  
  Fig 1: Installing Differential Side Oil Seal To Clutch Housing And Transaxle Case Using Tool
  Courtesy of NISSAN MOTOR CO., U.S.A.
  CAUTION:
  - Never incline differential oil seal.
  - Never damage clutch housing and transaxle case.
  - Check oil level after installation. Refer to "CHECKING M/T OIL ".