Commercial Service Tool

WARNING: This page is about a different variant/trim than selected.

COMMERCIAL SERVICE TOOL REFERENCE CHART

Tool name		Description
Socket	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing and installing drain plug 8 mm (0.31 in) 5 mm (0.20 in)
Spacer	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing mainshaft front bearing outer race 25 mm (0.98 in) dia. 25 mm (0.98 in)
Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing bushing Installing shift lever oil seal Installing select lever oil seal 17 mm (0.67 in) dia.
Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing input shaft front bearing 35 mm (1.38 in) dia. 25 mm (0.98 in) dia.
Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing input shaft rear bearing 24 mm (0.94 in) dia.
Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing differential side bearing inner race (transaxle case side) Installing input shaft rear bearing 43 mm (1.69 in) dia.
Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing differential side bearing inner race (clutch housing side) 45 mm (1.77 in) dia. 39 mm (1.54 in) dia.
Drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing differential side bearing inner race (transaxle case side) 52 mm (2.05 in) dia. 45 mm (1.77 in) dia.
Power tool	Courtesy of NISSAN MOTOR CO., U.S.A.	Loosening bolts and nuts
Puller	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing differential side bearing inner race (clutch housing side) Removing differential side bearing inner race (transaxle case side)
Puller	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing differential side bearing inner race (clutch housing side) Removing differential side bearing inner race (transaxle case side) Removing input shaft rear bearing Removing input shaft front bearing Removing mainshaft rear bearing inner race Removing 6th main gear Removing 4th main gear Removing 5th main gear Removing 1st main gear Removing 1st - 2nd synchronizer hub assembly Removing 2nd main gear Removing 3rd main gear Removing mainshaft front bearing outer race
Remover	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing bushing Removing mainshaft rear bearing outer race