LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Clutch) >> Service Information >> CSC (Concentric Slave Cylinder) >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove transaxle assembly. Refer to "REMOVAL AND INSTALLATION " (RS6F94R), "REMOVAL AND INSTALLATION " (RS6F52A) or "REMOVAL AND INSTALLATION " (RS6F52H).
  2. Remove CSC bolts and the CSC from clutch housing.
    Fig 1: Location Of CSC Bolts
    G04888807Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals