LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Clutch) >> Service Information >> CSC (Concentric Slave Cylinder) >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install CSC to clutch housing and then tighten bolts to specification.
    CAUTION:
    • Do not reuse CSC.
    • Do not insert and operate CSC because piston and stopper of CSC components may fall off.
  2. Install transaxle assembly. Refer to "REMOVAL AND INSTALLATION " (RS6F94R), "REMOVAL AND INSTALLATION " (RS6F52A) or "REMOVAL AND INSTALLATION " (RS6F52H).
  3. Bleed the air from the clutch hydraulic system. Refer to "AIR BLEEDING PROCEDURE ".
scientia non olet · About LEMON Manuals