Component Inspection

CHECK AMBIENT SENSOR

Turn ignition switch ON.
Remove ambient sensor. Refer to "REMOVAL AND INSTALLATION ".
Check resistance between ambient sensor terminals.

RESISTANCE REFERENCE CHART

Terminal		Condition	Resistance kΩ
Terminal		Temperature °C (°F)	Resistance kΩ
1	2	-15 (5)	12.73
		-10 (14)	9.92
		-5 (23)	7.80
		0 (32)	6.19
		5 (41)	4.95
		10 (50)	3.99
		15 (59)	3.24
		20 (68)	2.65
		25 (77)	2.19
		30 (86)	1.81
		35 (90)	1.51
		40 (104)	1.27
		45 (113)	1.07

Is the inspection result normal?

YES: INSPECTION END

NO: Replace ambient sensor.