Component Description

COMPONENT DESCRIPTION CHART

Unit	Description
Combination meter	Controls the following with the signals received from each unit via CAN communication and the signals from switches and sensors. Speedometer Tachometer Engine coolant temperature gauge Fuel gauge Warning lamps Indicator lamps Meter illumination control Information display
ECM	Transmits the following signals to the combination meter via CAN communication. Engine speed signal Engine coolant temperature signal Fuel consumption monitor signal Fuel filler cap warning display signal
ABS actuator and electric unit (control unit)	Transmits the vehicle speed signal to the combination meter via CAN communication.
IPDM E/R	Transmits the oil pressure switch signal to the BCM via CAN communication.
BCM	Transmits the following signals to the combination meter via CAN communication. Oil pressure switch signal Position light request signal Door switch signal TPMS display signal
TCM	Transmits the shift position signal to the combination meter via CAN communication.
CVT shift selector (with manual mode)	Transmits the following signals to the combination meter. Manual mode signal Non-manual mode signal Manual mode shift up signal Manual mode shift down signal
Paddle shifter	Transmits the following signals to the combination meter. Paddle shifter shift up signal Paddle shifter shift down signal
Fuel level sensor unit	Transmits the fuel level sensor signal to the combination meter.
Oil pressure switch	Transmits the oil pressure switch signal to the IPDM E/R.
Ambient sensor	Transmits the ambient sensor signal to the combination meter.
Auto amp.	Transmits the A/C auto amp connection recognition signal to the combination meter.
Parking brake switch	Transmits the parking brake switch signal to the combination meter.
Washer level switch	Transmits the washer level switch signal to the combination meter.