INFORMATION DISPLAY : Component Description

UNIT DESCRIPTION

Unit	Description
Combination meter	Controls the information display according to the signal received from each unit.
Fuel level sensor unit	Refer to , "DESCRIPTION ".
ECM	Transmits the following signals to the combination meter via CAN communication line. Engine speed signal Fuel consumption monitor signal Engine coolant temperature signal
ABS actuator and electric unit (control unit)	Transmits the vehicle speed signal to the combination meter via CAN communication line.
BCM	Transmits signals provided by various units to the combination meter via CAN communication line.
Ambient sensor	Detects the ambient temperature and transmits the ambient sensor signal to the combination meter.