LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2010 >> Rogue SL, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator >> Symptom Diagnosis >> The Fuel Gauge Does Not Move >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK COMBINATION METER INPUT SIGNAL

    Connect CONSULT-III and check the combination meter input signal. Refer to , "COMPONENT FUNCTION CHECK ".

    Is the inspection result normal? 

    YES: GO TO 2.

    NO: Replace combination meter.

  2. CHECK FUEL LEVEL SENSOR SIGNAL CIRCUIT

    Check the fuel level sensor signal circuit. Refer to , "DIAGNOSIS PROCEDURE ".

    Is the inspection result normal? 

    YES: GO TO 3.

    NO: Repair harness or connector.

  3. CHECK FUEL LEVEL SENSOR UNIT AND FUEL PUMP (FUEL LEVEL SENSOR)

    Perform a unit check for the fuel level sensor unit and fuel pump (fuel level sensor). Refer to , "COMPONENT INSPECTION [FUEL LEVEL SENSOR UNIT AND FUEL PUMP (FUEL LEVEL SENSOR)] ".

    Is the inspection result normal? 

    YES: GO TO 4.

    NO: Replace fuel level sensor unit and fuel pump (fuel level sensor). Refer to "2WD : REMOVAL AND INSTALLATION " [except for Mexico (2WD)], "AWD : REMOVAL AND INSTALLATION " [except for Mexico (AWD)], "REMOVAL AND INSTALLATION " (for Mexico).

  4. CHECK FUEL LEVEL SENSOR UNIT (SUB)

    Perform a unit check for the fuel level sensor unit (sub). Refer to , "COMPONENT INSPECTION [FUEL LEVEL SENSOR UNIT (SUB)] ".

    Is the inspection result normal? 

    YES: GO TO 5.

    NO: Replace fuel level sensor unit (sub). Refer to "AWD : REMOVAL AND INSTALLATION " (except for Mexico), "REMOVAL AND INSTALLATION " (for Mexico).

  5. CHECK FLOAT INTERFERENCE

    Check that the float arm interferes with or binds to other components in the fuel tank.

    Is the inspection result normal? 

    YES: Replace combination meter.

    NO: Repair or replace malfunctioning parts.

scientia non olet · About LEMON Manuals