Combination Meter: Fail-safe
The combination meter activates the fail-safe control if the CAN communication lines between each unit are malfunctioning.
FAIL-SAFE CHART
| Function | Specifications | |
|---|---|---|
| Speedometer | Reset to zero by suspending communication. | |
| Tachometer | ||
| Meter illumination control | Change to nighttime mode. | |
| Buzzer | Turned off by suspending communication. | |
| Warning lamp/indicator lamp | ABS warning lamp | Turned on by suspending communication. |
| Brake warning lamp | ||
| VDC OFF indicator lamp | ||
| SLIP indicator lamp | ||
| AWD warning lamp | ||
| Malfunction indicator lamp | ||
| Low tire pressure warning lamp | The lamp turns ON after flashing for 1 minutes | |
| SPORT/CVT indicator lamp | Turned off by suspending communication. | |
| AWD indicator lamp | ||
| AWD LOCK indicator lamp | ||
| Oil pressure warning lamp | ||
| Door warning lamp | ||
| CRUISE indicator lamp | ||
| SET indicator lamp | ||
| KEY warning lamp | ||
| High beam indicator lamp | ||
| Turn signal indicator lamp | ||
| Tail indicator lamp | ||