DTC Index
DTC INDEX
| Display contents of CONSULT-III | Time | Diagnostic item is detected when. | Refer to | |
|---|---|---|---|---|
| U1000: CAN COMM CIRCUIT | CRNT | PAST | Combination meter is not transmitting or receiving CAN communication signal for 2 seconds or more. | U1000 CAN COMM CIRCUIT |
| U1010: CONTROL UNIT (CAN) | CRNT | PAST | Detecting error during the initial diagnosis of CAN controller of combination meter. | U1010 CONTROL UNIT (CAN) |
| B2205: VEHICLE SPEED | CRNT | PAST | The abnormal vehicle speed signal is input from ABS actuator and electric unit (control unit) for 2 seconds or more. | B2205 VEHICLE SPEED |
| B2267: ENGINE SPEED | CRNT | PAST | ECM continuously transmits abnormal engine speed signals for 2 seconds or more. | B2267 ENGINE SPEED |
| B2268: WATER TEMP | CRNT | PAST | ECM continuously transmits abnormal engine coolant temperature signals for 60 seconds or more. | B2268 WATER TEMP |
NOTE:
The details of TIME display are as follows.
- CRNT: The malfunctions that are detected now.
- PAST: The malfunctions was detected in the past. IGN counter is displayed on FED (Freeze Frame data). - 1 - 39: The number is indicated when it is normal at past and a malfunction was detected in the past. It increases like 0 → 1 → 2. 38 → 39 after returning to the normal condition whenever IGN OFF → ON. It is fixed to 39 until the self-diagnosis results are erased if it is over 39. It returns to 0 when a malfunction is detected again in the process.