Component Function Check
- CHECK COMBINATION METER INPUT SIGNAL
- Connect the CONSULT-III.
- Select the "Data Monitor" for the "METER/M&A" and compare the "FUEL METER" monitor value with the fuel gauge reading on the combination meter.
MONITOR VALUE CHART
| Fuel gauge indication position (segment illumination position) | Monitor value [lit] |
|---|---|
| 13/13 | Approx. 57 - 61 |
| 10/13 | Approx. 44 - 49 |
| 7/13 | Approx. 31 - 35 |
| 4/13 | Approx. 17 - 21 |
| 0/13 | Approx. 0 - 3 |
Does monitor value match fuel gauge reading?
YES: INSPECTION END
NO: Replace combination meter.