LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2010 >> Rogue SL, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Removal And Installation >> Center Console Assembly >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

  1. Remove console rear finisher assembly.
    • Console rear finisher assembly (1) fixing clips and pawls using a remover tool.
    • Pull back console rear finisher assembly.
      Fig 1: Removing Console Rear Finisher Assembly Fixing Clips And Pawls Using Remover Tool
      G06585743Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove rear cup holder assembly.
    • Remove rear cup holder assembly (1) fixing screws (A).
    • Pull back rear cup holder assembly.
      Fig 2: Identifying Rear Cup Holder Assembly With Fixing Screws
      G05371279Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove console pocket.
    • Open the console lid assembly.
    • Pull up console pocket (1).
      Fig 3: Pulling Up Console Pocket
      G06585745Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove console lid assembly.
    • Remove console mask (1) fixing pawls with remover tool, and then remove console mask.
    • Remove console lid assembly fixing screws (A).
    • Pull up console lid assembly.
      Fig 4: Removing Console Mask With Fixing Pawls Using Remover Tool
      G06585746Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Remove console upper finisher.
    • Remove console upper finisher (1) fixing screws (A).
    • Remove console upper finisher fixing clips with remover tool.
    • Pull up console upper finisher.
      Fig 5: Pulling Up Console Upper Finisher
      G06585747Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Remove inside key antenna. Refer to "CONSOLE : REMOVAL AND INSTALLATION ".
  7. Remove power socket. Refer to "CONSOLE POWER SOCKET : REMOVAL AND INSTALLATION ".
  8. Remove console harness assembly.
scientia non olet · About LEMON Manuals