Removal and Installation of Rear Oil Seal: Installation

Apply new engine oil to new oil seal and install it using a suitable drift.
- Install new oil seal in the direction shown.
  
  Fig 1: Applying Engine Oil To Both Oil Seal Lip And Dust Seal Lip
  Courtesy of NISSAN MOTOR CO., U.S.A.
- Press fit new oil seal straight using a suitable drift, to avoid causing burrs or tilting.
  
  Fig 2: Installing Oil Seal
  Courtesy of NISSAN MOTOR CO., U.S.A.
- Press in the new oil seal to the specified depth as shown.
  
  Fig 3: Identifying Cylinder Block Rear End Face Dimension
  Courtesy of NISSAN MOTOR CO., U.S.A.
Installation of the remaining components in reverse order of removal.