LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical (Qr25DE) >> Service Information >> Drive Belts >> Removal and Installation of Drive Belt Auto-tensioner >> Removal

Removal and Installation of Drive Belt Auto-tensioner: Removal

CAUTION: The complete auto-tensioner must be replaced as a unit, including the pulley.
  1. Remove the front RH engine cover.
  2. Remove the drive belt "REMOVAL AND INSTALLATION ".
  3. Remove the generator. Refer to "REMOVAL AND INSTALLATION QR25DE ".
  4. Remove the drive belt auto-tensioner, with power tool.
    CAUTION: Do not loosen the auto-tensioner pulley bolt. (Do not turn it counterclockwise). If turned counterclockwise, the complete auto-tensioner must be replaced as a unit, including pulley.
scientia non olet · About LEMON Manuals