LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System >> Service Information >> Rear Drum Brake >> Removal and Installation of Wheel Cylinder >> Removal

Removal and Installation of Wheel Cylinder: Removal

  1. Remove the rear drum brake assembly. Refer to "REMOVAL AND INSTALLATION OF DRUM BRAKE ASSEMBLY ".
  2. Disconnect the brake tube from the wheel cylinder.
  3. Remove the wheel cylinder bolts, and then remove wheel cylinder from the back plate.
scientia non olet · About LEMON Manuals