LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System >> Service Information >> Brake Tube And Hose >> Front Brake Tube and Hose >> Removal

Front Brake Tube and Hose: Removal

CAUTION:
  • Be careful not to splash brake fluid on painted areas; it may cause paint damage. If brake fluid is splashed on painted areas, wash it away with water immediately.
  • Cover the open end of brake tubes and hoses when disconnecting to prevent entrance of dirt.
  1. Drain brake fluid. Refer to "DRAIN AND REFILL ".
  2. Remove brake tube from brake hose, using suitable tool.
  3. Remove union bolt, and remove brake hose from caliper assembly.
  4. Remove lock plate, and remove brake hose from vehicle.
Fig 1: Identifying Brake Hose Flare Nut And Lock Plate
G04927300Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals