LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Murano LE >> Repair and Diagnosis >> Transmission >> Transfer Case, Rear Propeller Shaft & Rear Final Drive >> Transfer: TY20A >> Disassembly And Assembly >> Drive Pinion >> Disassembly

Drive Pinion: Disassembly

  1. Remove pinion sleeve mounting bolts.
    Fig 1: Locating Pinion Sleeve Mounting Bolts
    G04921280Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Lightly tap adapter case with a plastic hammer to remove pinion sleeve assembly.
  3. Remove the pinion sleeve shim.
  4. Remove the pinion lock nut.
    Fig 2: Tapping Adapter Case
    G05892787Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Remove drive pinion assembly from pinion sleeve with the drift (A) [SST: ST33220000 (J-25804-01)].
    Fig 3: Removing Drive Pinion Assembly
    G05892788Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Remove companion flange.
  7. Remove the O-ring from pinion sleeve.
  8. Remove pinion sleeve oil seal from the pinion sleeve with a suitable tool.
    CAUTION: Be careful not to damage the pinion sleeve.
  9. Remove pinion rear bearing inner race.
    Fig 4: Identifying Pinion Sleeve Oil Seal
    G04921283Courtesy of NISSAN MOTOR CO., U.S.A.
  10. Remove the pinion rear bearing outer race with the puller (A) [SST: KV381054S0 (J-34286)].
    Fig 5: Removing Pinion Rear Bearing Outer Race
    G05892790Courtesy of NISSAN MOTOR CO., U.S.A.
  11. Remove the pinion front bearing outer race with the puller (A) [SST: KV381054S0 (J-34286)].
    Fig 6: Removing Pinion Front Bearing Outer Race
    G05892791Courtesy of NISSAN MOTOR CO., U.S.A.
  12. Remove dust cover.
  13. Remove the collapsible spacer from the drive pinion.
  14. Using the replacer (A) (commercial service tool), press the pinion front bearing inner race out of the drive pinion.
Fig 7: Pressing Pinion Front Bearing Inner Race Of Drive Pinion
G05892792Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals