Removal and Installation: Installation

Note the following, and install in the reverse order of removal.

• When installing the transfer to the transaxle, install the mounting bolts following the standard below.
  BOLT LENGTH SPECIFICATION
  
  

  Bolt No.	1	2
  Quantity	4	2
  Bolt length "l  " mm (in)	65 (2.56)	40 (1.57)

  Fig 1: Identifying Transfer Assembly And Fitting Transaxle Mounting Bolts

  Courtesy of NISSAN MOTOR CO., U.S.A.
  CAUTION: When installing transfer to transaxle, be careful not to damage oil seal of transaxle.
• Check oil level and check for oil leakage after installation. Refer to "INSPECTION ".