LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Murano LE >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Transfer Case, Rear Propeller Shaft & Rear Final Drive >> Transfer: TY20A >> On-Vehicle Repair >> Side Oil Seal >> Removal and Installation >> Removal

Removal and Installation: Removal

NOTE: Transaxle side oil seal is attached to transaxle assembly. Replace it when transfer assembly is removed from vehicle.
  1. Remove front drive shaft (right side). Refer to "EXPLODED VIEW ".
    CAUTION: Be careful not to damage gear oil seal inside of transfer.
  2. Remove side oil seal with a suitable tool.
CAUTION: Be careful not to damage adapter case.
Fig 1: Removing Side Oil Seal
G05892762Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals