Transfer Oil: Refilling

Remove filler plug (1) and gasket. Then fill oil up to mounting hole (A) for the filler plug.

Fig 1: Identifying Filler Plug And Mount Hole
Courtesy of NISSAN MOTOR CO., U.S.A.

Oil grade and viscosity : Refer to "FLUIDS AND LUBRICANTS ".

Oil capacity : Refer to "GENERAL SPECIFICATIONS ".

CAUTION: Carefully fill the oil. (Fill up for approximately 3 minutes.)
Leave the vehicle for 3 minutes. Then check oil level again.
Before installing filler plug, set a new gasket. Install filler plug on transfer and tighten to the specified torque. Refer to "EXPLODED VIEW ".

CAUTION: Never reuse gasket.