LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Murano LE >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Transfer Case, Rear Propeller Shaft & Rear Final Drive >> Transfer: TY20A >> On-Vehicle Maintenance >> Transfer Oil >> Inspection >> Oil Level

Oil Level

  1. Remove filler plug (1) and gasket. Then check that oil is filled up (A) from mounting hole for the filler plug.
  2. Before installing filler plug, set a new gasket. Install filler plug on transfer and tighten to the specified torque. Refer to "EXPLODED VIEW ".
Fig 1: Identifying Filler Plug
G05892756Courtesy of NISSAN MOTOR CO., U.S.A.
CAUTION: Never reuse gaskets.
scientia non olet · About LEMON Manuals