LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Murano LE >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Transfer Case, Rear Propeller Shaft & Rear Final Drive >> Transfer: TY20A >> Component Diagnosis >> U1010 Control Unit (Can) >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. DTC REPRODUCTION PROCEDURE

    With CONSULT-III 

    1. Turn the ignition switch OFF to ON.
    2. Perform AWD control unit self-diagnosis.

    Is DTC "U1010" detected? 

    YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

    NO: INSPECTION END