AWD Warning Lamp Indication
AWD LOCK INDICATOR LAMP SPECIFICATION
| Condition | AWD warning lamp |
|---|---|
| Lamp check | Turns ON when ignition switch is turned ON. Turns OFF after the engine start. |
| AWD system malfunction | ON |
| Protection function is activated due to heavy load to electric controlled coupling. (AWD system is not malfunctioning and AWD system changes to front wheel drive.) | Quick blinking: 2 times/second (Blinking in approx. 1 minute and then turning OFF) |
| Large difference in diameter of front/rear tires | Slow blinking: 1 time/2 seconds (Continuing to blink until turning ignition switch OFF) |
| Other than above (system normal) | OFF |
CAUTION:
- AWD warning lamp also turns ON due to data reception error, CAN communication error etc.