LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Murano LE >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Transfer Case, Rear Propeller Shaft & Rear Final Drive >> Transfer: TY20A >> Component Diagnosis >> AWD Lock Switch >> Component Inspection

Component Inspection

  1. CHECK AWD LOCK SWITCH
    1. Turn the ignition switch OFF.
    2. Remove AWD lock switch.
    3. Check the continuity between AWD lock switch connector terminals.
    CONTINUITY CHART

    AWD lock switch Condition Continuity
    Connector Terminal
    M8 1 3 When releasing AWD lock switch. Not existed
    When AWD lock switch is hold pressed. Existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace AWD lock switch.

scientia non olet · About LEMON Manuals