Combination Meter: Fail-Safe: Fail-Safe

The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.

FAIL-SAFE CHART

Function		Specifications
Speedometer		Reset to zero by suspending communication.
Tachometer
Water temperature gauge
Illumination control		When suspending communication, changes to nighttime mode.
Information display	Door open warning	The display turns off by suspending communication.
	Parking brake release warning	The display turns off by suspending communication.
	Instantaneous fuel warning	When reception time of an abnormal signal is 2 seconds or less, the last received datum is used for calculation to indicate the result. When reception time of an abnormal signal is more than two seconds, the last result calculated during normal condition is indicated.
	Average fuel consumption
	Average vehicle speed
	Travel distance
Buzzer		The buzzer turns off by suspending communication.
Warning lamp/indicator lamp	ABS warning lamp	The lamp turns on by suspending communication.
	VDC OFF indicator lamp
	SLIP indicator lamp
	Brake warning lamp
	AWD warning lamp
	Low tire pressure warning lamp	The lamp turns ON after flashing for 1 minuite.
	High beam indicator lamp	The lamp turns off by suspending communication.
	Turn signal indicator lamp
	Light indicator lamp
	Oil pressure warning lamp
	Malfunction indicator lamp
	CRUISE indicator lamp
	O/D OFF indicator lamp
	AWD LOCK indicator lamp
	Key warning lamp