LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> 370Z Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transmission (FS6R31A)) >> Removal And Installation >> Gear Lever Position Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove transmission assembly. Refer to "WITH S-MODE : REMOVAL AND INSTALLATION ".
  2. Remove clips (1) from gear lever position sensor (2) harness and bracket.
  3. Remove gear lever position sensor harness from bracket.
  4. Remove gear lever position sensor from rear extension upper cover.
    Fig 1: Identifying Gear Lever Position Sensor And Clips
    G06051950Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals