Inspection After Installation

Control Lever

• When control lever is shifted to each gear position, check that there is no interference or boot disengagement.
• When control lever is shifted to each gear position, check that there is no binding, noise, or backlash that disturbs shifting.
• When control lever is shifted to the 5th or 6th gear position by being pressed in the right side direction without being pressed downward, check that there is no binding or poor gear engagement.
• When control lever is shifted to the 1st-2nd side and released, check that control lever returns smoothly to the neutral position.
• When control lever is shifted to the 5th-6th side and released, check that control lever returns smoothly to the neutral position.
• When control lever is in a position other than the reverse gear position, check that control lever can be pressed downward.
• When control lever is pressed and held downward, check that control lever can be shifted to the reverse gear position.
• When control lever is shifted from the reverse gear position to the neutral position, check that control lever returns smoothly to the neutral position with spring power.
• When control lever is not pressed downward, check that control lever cannot be shifted to the reverse gear position.

Shift Knob

Check that there is no shift knob dislocation.

Boot

Check that there is no damage, twist, or dislocation of boot.