Inspection After Disassembly

Shift Fork and Fork Rod

• Check the contact surface of each forks, rods, levers, and brackets for excessive wear, uneven wear, bend, and damage. Replace if necessary.
  Fig 1: Locating Shift Fork And Fork Rod Damage Area

  Courtesy of NISSAN MOTOR CO., U.S.A.
• Check if the width of shift fork hook (sliding area with coupling sleeve) is within allowable specification below.

  One-side wear specification : Refer to "SHIFT FORK ".

  Sliding width of new part : Refer to "SHIFT FORK ".

  Fig 2: Identifying Width Of Shift Fork Hook

  Courtesy of NISSAN MOTOR CO., U.S.A.