LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> 370Z Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transmission (FS6R31A)) >> Disassembly And Assembly >> Counter Shaft And Gear >> Disassembly

Counter Shaft And Gear: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove 3rd counter gear with the following procedure.
    1. Set a puller [Commercial service tool] to 3rd counter gear.
    2. Remove the parts below together with 3rd counter gear from counter shaft with a pressing machine.
      Fig 1: Removing 3rd Counter Gear
      G06052229Courtesy of NISSAN MOTOR CO., U.S.A.
      CAUTION: Never drop counter shaft.
  2. Remove 3rd-4th spread springs, 3rd-4th shifting inserts, and 3rd-4th coupling sleeve from 3rd-4th synchronizer hub.
  3. Remove 3rd needle bearing from counter shaft.
  4. Remove 3rd gear bushing with the following procedure.
    1. Set a puller [Commercial service tool] to 3rd gear bushing.
    2. Remove 3rd gear bushing from counter shaft with a pressing machine.
      CAUTION:
      • Never use oil hole of 3rd gear bushing when press out.
      • Never drop counter shaft.
        Fig 2: Pressing 3rd Gear Bushing
        G04875689Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals