LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> 370Z Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transmission (FS6R31A)) >> Component Diagnosis >> Back-Up Lamp Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. CHECK BACK-UP LAMP SWITCH
    1. Disconnect back-up lamp switch connector. Refer to "REMOVAL AND INSTALLATION ".
    2. Check continuity between back-up lamp switch terminals.
      BACK-UP LAMP SWITCH CONTINUITY SPECIFICATION

      Terminal Condition Continuity
      1 2 Reverse gear position Existed
      Except reverse gear position Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace back-up lamp switch. Refer to "REMOVAL AND INSTALLATION ".