RUNOUT Measuring Point

Propeller shaft runout measuring point (Point "Δ ").

Fig 1: Identifying Runout Measuring Point

Courtesy of NISSAN MOTOR CO., U.S.A.

Standard 

M/T 

A : 340 mm (13.39 in) 

B : 610 mm (24.02 in) 

C : 340 mm (13.39 in) 

A/T 

A : 340 mm (13.39 in) 

B : 580 mm (22.83 in) 

C : 340 mm (13.39 in)