UP-SHIFT INDICATOR : System Description
Combination meter receives the engine speed signal from ECM via CAN communication line, and then turns up-shift indicator ON, OFF or blinking.
Combination meter turns up-shift indicator ON, OFF or Blinking under the following conditions
SYSTEM DESCRIPTION
| Up-shift indicator status | Engine speed | Setting range | ||
|---|---|---|---|---|
| ON | Set value(1) or more | No setting - 9,000 rpm | ||
| Blinking | From (Set value(1) minus 500 rpm) | - | ||
| OFF | (Set value(1) minus 600 rpm) or less | - | ||
|
||||