System Description

Engine-start Effect Function 

• The combination meter receives engine speed signal and engine status signal from ECM, starter relay status signal from BCM, vehicle speed signal from ABS actuator and electric unit (control unit) via CAN communication. The triple meter receives meter effect signal from combination meter via communication line.
• After the end of cranking and recognition of engine revolution, the combination meter illuminates the meter light in stages and sweeps the needles of the speedometer, tachometer, volt meter and oil temperature gauge.
  NOTE: The engine-start effect function enables ON/OFF with an operation of information display.

Cancel Condition

• When vehicle speed is more than 1 km/h (0.6 MPH).