LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> 370Z Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator >> Ecu Diagnosis >> Combination Meter >> Reference Value >> Physical Values

Physical Values

COMBINATION METER TERMINAL REFERENCE

Terminal No. (Wire color) Description Condition Value (Approx.)
+ - Signal name Input/Output
1 (V) Ground Battery power supply Input Ignition switch OFF - Battery voltage
2 (O) Ground Ignition signal Input Ignition switch ON - Battery voltage
3 (L) Ground Vehicle speed signal (2-pulse) Output Ignition switch ON Speedometer operated [When vehicle speed is approx. 40 km/h (25 MPH)]
NOTE: The maximum voltage varies depending on the specification (destination unit).
G05223700Courtesy of NISSAN MOTOR CO., U.S.A.
4 (Y) Ground Vehicle speed signal (8-pulse) Output Ignition switch ON Speedometer operated [When vehicle speed is approx. 40 km/h (25 MPH)]
NOTE: The maximum voltage varies depending on the specification (destination unit).
G05223684Courtesy of NISSAN MOTOR CO., U.S.A.
5 (B) Ground Illumination control signal Output Ignition switch ON
  • Lighting switch 1ST
  • When meter illumination is maximum
G05975245Courtesy of NISSAN MOTOR CO., U.S.A.
  • Lighting switch 1ST
  • When meter illumination is step 12
G05975246Courtesy of NISSAN MOTOR CO., U.S.A.
  • Lighting switch 1ST
  • When meter illumination is minimum
10 V
9 (BR) Ground Communication signal (METER<=>TRIPLE METER) Output Ignition switch ON -
G06050791Courtesy of NISSAN MOTOR CO., U.S.A.
10 (L) Ground Communication signal (TRIPLE METER<=>METER) Input Ignition switch ON -
G06050792Courtesy of NISSAN MOTOR CO., U.S.A.
12 (G) Ground S-MODE switch signal Input Ignition switch ON S-MODE switch operation 12 V
Other than the above 0 V
15 (L) Ground ACC power supply Input Ignition switch ACC - Battery voltage
16 (R) Ground Air bag signal Input Ignition switch ON Air bag warning lamp ON 4 V
Air bag warning lamp OFF 0 V
17 (B) Ground Ground - Ignition switch ON - 0 V
18 (V) Ground Ambient sensor signal Input Ignition switch ON Changes depending to ambient temperature.
G05223707Courtesy of NISSAN MOTOR CO., U.S.A.
19 (G) Ground A/C auto amp. connection recognition signal Input Ignition switch ON - 5 V
20 (GR) Ground Ambient sensor ground Input Ignition switch ON - 0 V
21 (L) - CAN-H - - - -
22 (P) - CAN-L - - - -
23 (B) Ground Ground - Ignition switch ON - 0 V
24 (Y) Ground Fuel level sensor signal ground - Ignition switch ON - 0 V
25 (W) Ground Alternator signal Input Ignition switch ON Charge warning lamp ON 2 V
Charge warning lamp OFF 12 V
26 (O) Ground Parking brake switch signal Input Engine idling Parking brake ON 0 V
Parking brake OFF 12 V
27 (LG) Ground Brake fluid level switch signal Input Ignition switch ON Brake fluid level is normal 12 V
Brake fluid level is less than LOW level 0 V
28 (Y) Ground Security signal Input Ignition switch ON Security warning lamp ON 0 V
Security warning lamp OFF 12 V
29 (GR) Ground Washer level switch signal Input Ignition switch ON Washer level switch ON 0 V
Washer level switch OFF 5 V
32 (G) Ground Paddle shifter down signal Input Ignition switch ON Paddle shifter down operation 0 V
Other than the above 5 V
33 (O) Ground Paddle shifter up signal Input Ignition switch ON Paddle shifter up operation 0 V
Other than the above 5 V
34 (BR) Ground Fuel level sensor signal Input Ignition switch ON -
G05891061Courtesy of NISSAN MOTOR CO., U.S.A.
35 (L) Ground Seat belt buckle switch signal (driver side) Input Ignition switch ON When driver seat belt is fastened. 12 V
When driver seat belt is unfastened. 0 V
36 (P) Ground Passenger seat belt warning signal Input Ignition switch ON
  • When getting in the passenger seat.
  • When passenger seat belt is fastened.
12 V
  • When getting in the passenger seat.
  • When passenger seat belt is unfastened.
0 V
37 (G) Ground Not manual mode signal Input Ignition switch ON Manual mode 12 V
Other than the above 0 V
38 (V) Ground Manual mode shift down signal Input Ignition switch ON Selector lever down operation 0 V
Other then the above 12 V
39 (L) Ground Manual mode shift up signal Input Ignition switch ON Selector lever up operation 0 V
Other then the above 12 V
40 (W) Ground Manual mode signal Input Ignition switch ON Manual mode 0 V
Other than the above 12 V