LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Control System - DTCS P0137 To P0445 (Qr25DE)) >> DTC P0335 CKP Sensor (Pos) >> On Board Diagnosis Logic

On Board Diagnosis Logic

WARNING: This page is about a different variant/trim than selected.
DTC DETECTING CONDITION AND POSSIBLE CAUSES CHART

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0335 0335 Crankshaft position sensor (POS) circuit
  • The crankshaft position sensor (POS) signal is not detected by the ECM during the first few seconds of engine cranking.
  • The proper pulse signal from the crankshaft position sensor (POS) is not sent to ECM while the engine is running.
  • The crankshaft position sensor (POS) signal is not in the normal pattern during engine running.
  • Harness or connectors

    [Crankshaft position sensor (POS) circuit is open or shorted.]

    (Accelerator pedal position sensor circuit is shorted.)

    (Refrigerant pressure sensor circuit is shorted.)

    (EVAP control system pressure sensor circuit is sorted.)

  • Crankshaft position sensor (POS)
  • Accelerator pedal position sensor (APP sensor 2)
  • Refrigerant pressure sensor
  • EVAP control system pressure sensor
  • Signal plate
scientia non olet · About LEMON Manuals