LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transmission) >> RS6F94R >> Transaxle Assembly >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Drain gear oil. Refer to "CHANGING M/T OIL ".
  2. Drain clutch fluid and remove clutch tube from CSC. Refer to "REMOVAL AND INSTALLATION ".
    CAUTION: Do not depress clutch pedal during removal procedure.
  3. Remove engine and transaxle assembly. Refer to "REMOVAL AND INSTALLATION ".
  4. Remove starter motor. Refer to "REMOVAL AND INSTALLATION MR20DE ".
  5. Remove transaxle assembly to engine bolts.
  6. Separate transaxle assembly from engine.