LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transmission) >> RS6F52H >> Preparation >> Commercial Service Tools

Commercial Service Tools

WARNING: This page is about a different variant/trim than selected.
COMMERCIAL SERVICE TOOLS

Tool name Description
Pin punch
  1. 4.5 mm (0.177 in) dia.
G04875793Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing and installing retaining pin
Pin punch
  1. 5.5 mm (0.217 in) dia.
G04875793Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing and installing retaining pin of selector lever
Pin punch
  1. 7.5 mm (0.295 in) dia.
G04875793Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing and installing retaining pin of each shifter lever
Drift
  1. 24.5 mm (0.965 in) dia.
G04888837Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing striking rod oil seal and shifter lever oil seal
Puller
G04875583Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing each bearing, gear, and bushing
Puller
G04875599Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing each bearing, gear, and bushing
Power tool
G04874612Courtesy of NISSAN MOTOR CO., U.S.A.
 Loosening bolts and nuts
scientia non olet · About LEMON Manuals