LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transmission) >> RS6F52A >> Service Data And Specifications (SDS) >> Available Shims >> Bearing Preload

Bearing Preload

WARNING: This page is about a different variant/trim than selected.
BEARING PRELOAD SPECIFICATIONS

Differential side bearing preload: L(1) 0.15 - 0.21 mm (0.0059 - 0.0083 in)
(1) Install shims which are "deflection of differential case" + "L" in thickness.
scientia non olet · About LEMON Manuals