6TH Main Gear Adjusting Shim
WARNING: This page is about a different variant/trim than selected.
6TH MAIN GEAR ADJUSTING SHIM
| End play standard value | 0 - 0.1 mm (0 - 0.004 in) | ||||
|---|---|---|---|---|---|
| Thickness mm (in) | Part number(1) | Thickness mm (in) | Part number(1) | ||
| 0.88 (0.0346) | 32237 8H560 | 1.20 (0.0472) | 32237 8H564 | ||
| 0.96 (0.0378) | 32237 8H561 | 1.28 (0.0504) | 32237 8H565 | ||
| 1.04 (0.0409) | 32237 8H562 | 1.36 (0.0535) | 32237 8H566 | ||
| 1.12 (0.0441) | 32237 8H563 | ||||
|
|||||