Piston Ring
WARNING: This page is about a different variant/trim than selected.
PISTON RING SPECIFICATIONS
| Unit: mm (in) | |||
|---|---|---|---|
| Standard | Limit | ||
| Side clearance | Top | 0.040 - 0.080 (0.0018 - 0.0031) | 0.11 (0.0043) |
| 2nd | 0.030 - 0.070 (0.0012 - 0.0028) | 0.10 (0.0039) | |
| Oil ring | 0.045 - 0.125 (0.0018 - 0.0049) | - | |
| End gap | Top | 0.21- 0.31 (0.0083 - 0.0122) | 0.54 (0.0213) |
| 2nd | 0.37 - 0.52 (0.0146 - 0.0205) | 0.67 (0.0264) | |
| Oil (rail ring) | 0.20 - 0.45 (0.0079 - 0.0177) | 0.95 (0.0374) | |