General Specifications
WARNING: This page is about a different variant/trim than selected.
GENERAL SPECIFICATIONS
| Cylinder arrangement | In-line 4 | |
| Displacement cm3 (in3 ) | 2,488 (151.82) | |
| Bore and stroke mm (in) | 89.0 x 100 (3.50 x 3.94) | |
| Valve arrangement | DOHC | |
| Firing order | 1-3-4-2 | |
| Number of piston rings | Compression | 2 |
| Oil | 1 | |
| Compression ratio | 9.5:1 | |
| Compression pressure kPa (kg/cm2 , psi) / 250 rpm | Standard | 1,250 (12.8, 181.3) |
| Minimum | 1,060 (10.8, 153.7) | |
| Differential limit between cylinders | 100 (1.0, 14) | |
| Valve timing | ||
VALVE TIMING REFERENCE
| Unit: degree | |||||
| a | b | c | d | e | f |
| 224° | 244° | 0° | 64° | 3° | 41° |